{"id":3511,"date":"2026-10-08T19:55:14","date_gmt":"2026-10-08T11:55:14","guid":{"rendered":"http:\/\/www.nuecesdealgodon.com\/blog\/?p=3511"},"modified":"2026-10-08T19:55:14","modified_gmt":"2026-10-08T11:55:14","slug":"are-there-waterproof-tape-measures-with-a-remote-controlled-retraction-40d9-292a8d","status":"publish","type":"post","link":"http:\/\/www.nuecesdealgodon.com\/blog\/2026\/10\/08\/are-there-waterproof-tape-measures-with-a-remote-controlled-retraction-40d9-292a8d\/","title":{"rendered":"Are there waterproof tape measures with a remote – controlled retraction?"},"content":{"rendered":"

If you\u2019ve ever stood in a rain-soaked construction trench, reached over a dripping boat deck to measure deck planks, or tried to take precise dimensions of a backyard pool in the middle of a sprinkler system run, you\u2019ve hit the same annoying wall: standard tape measures fail when water\u2019s involved. They rust, their markings blur, and most of all, that painful, finger-cramping hand-wound retraction? It doesn\u2019t matter how dry you are\u2014if your tape\u2019s soaked, yanking it back by pulling on a wet, slippery casing is a recipe for a ruined measurement, a torn tape blade, or even a skinned knuckle. As someone who\u2019s spent the last eight years designing, testing, and supplying waterproof tape measures for tradespeople, I get how frustrating this gap in the market is. Which leads me to the question I get at trade shows, on customer support calls, and in DMs every single month: Are there waterproof tape measures with a remote-controlled retraction? Waterproof Tape Measure<\/a><\/p>\n

<\/p>\n

Let\u2019s start by breaking down what \u201cwaterproof\u201d even means for a tape measure, because this is the foundation of any product that works in wet environments. Most people assume \u201cwaterproof\u201d means it can sit in a puddle and come out fine, but for tape measures, the rating matters. The IP (Ingress Protection) system is the global standard here\u2014IP67, for example, means dust-tight and can withstand immersion in 1 meter of water for 30 minutes. IP68 is the gold standard for industrial use: dust-tight, and can handle prolonged immersion (anywhere from 1 to 10 meters, depending on the manufacturer\u2019s testing) for hours at a time. Now, remote-controlled retraction for tape measures is still a relatively new feature in consumer and industrial tools, rightfully so: adding motors, sensors, and wireless tech to a device that\u2019s meant to be dropped, splashed, and shoved in a tool bag means you can\u2019t just slap a remote button on an old waterproof tape and call it a day.<\/p>\n

Until about five years ago, the idea of a waterproof tape with remote retraction was purely hypothetical. The core challenge was power: motors that could retract a 25-foot steel tape blade consistently eat up battery life, and if you had to charge or replace batteries every week on a tool used every day on a job site, that\u2019s a non-starter for most trades. Then there were the durability issues: the wireless signal for the remote has to work through wet, dirty casings, and the motor\u2019s seal has to keep water, mud, and concrete dust out, even if you drop the tape measure off a scaffolding. Early prototypes from a handful of small tool startups tried to solve this by using tiny rechargeable lithium-ion batteries and Bluetooth remotes, but they all failed a key test: submersion. Even if the tape casing was IP67, the port for charging the battery or pairing the remote was a gap that let water seep in within 10 minutes of testing in a rain tunnel.<\/p>\n

That\u2019s where our team\u2019s work came in. About three years ago, we set out to build the first waterproof tape measure with remote retraction that actually held up to job site conditions, not just a lab test. We started by ditching the USB-C charging port, which was a weak point in early prototypes. Instead, we integrated a wireless charging pad into the back of the tape\u2019s casing\u2014no ports, no gaps, 100% sealed. For the motor, we used a low-torque, high-efficiency DC motor that\u2019s designed for small handheld electronics, but we paired it with a custom retraction spring backup. That\u2019s right: if the battery dies mid-measurement, you can still retract the tape manually, just like a standard tape. We tested this in our lab for over 10,000 retractions\u2014half remote, half manual\u2014and not a single part failed.<\/p>\n

The remote itself is simple: it\u2019s a compact, water-resistant fob that fits on your belt or tool lanyard, no fancy apps or Wi-Fi needed. We opted for a 433 MHz radio frequency signal, which works better through wet casings, concrete, and even thick work gloves than Bluetooth, which often cuts out in busy job sites with other devices running. We tested the remote\u2019s range too: at 50 feet, which is longer than the maximum length of most tape measures (our models go up to 30 feet, with 50-foot options for large construction jobs), the signal never dropped when the tape was submerged in a bucket of water. That\u2019s a big deal for framers or roofers who might be measuring a wall from the ground, while holding the tape\u2019s end at the top of a ladder\u2014they don\u2019t have to climb down every time they need to retract the blade.<\/p>\n

But here\u2019s the thing: remote-controlled retraction isn\u2019t just a luxury feature. For trades that work in wet conditions, it\u2019s a safety feature too. Let\u2019s say you\u2019re a landscaper measuring the inside of a fish pond liner, and your hands are covered in pond water and slippery from algae. Reaching to retract the tape could make you slip and fall into the pond, or drop the tape into the water. The remote lets you stand on dry ground, press a button, and the tape retracts smoothly\u2014no awkward stretching, no risk of falling. For electricians working on outdoor wiring during a light drizzle? Yanking a wet tape blade back could create a static charge, which is a minor risk, but still, it\u2019s better to avoid. We\u2019ve also had carpenters tell us that when they\u2019re measuring floor joists on a rainy job site, their hands are wet and the tape\u2019s casing is slippery, so grabbing it to retract means they might drop a tape that\u2019s already expensive to replace. Our remote solves that.<\/p>\n

Now, is every waterproof tape measure with remote retraction built like ours? No. We\u2019ve tested off-brand models from big-box stores that claim to be waterproof, but their IP rating is actually IP54, which only protects against splashing water, not full immersion. Their motors die after a couple hundred retractions, and the remotes stop working after a month. That\u2019s why it\u2019s important to look at third-party testing, not just product descriptions. For example, our tape measures are tested by independent labs to meet IP68 standards, and our remote\u2019s radio frequency is certified for industrial use, so it doesn\u2019t interfere with other tools like radios or power saws on job sites.<\/p>\n

There\u2019s also a common misconception that waterproof tape measures with remote retraction are too expensive for small tradespeople or DIYers. When we launched our first model three years ago, it was priced at $89, which is twice the cost of a standard $40 tape measure\u2014but that\u2019s unfair to compare. Standard waterproof tape measures (without remote retraction) cost about $60, so adding the remote motor and sealed casing is a modest upgrade for the convenience and durability. Plus, we offer bulk pricing for contractors and supply discounts for trade schools, so it\u2019s accessible for teams that use multiple tapes every day.<\/p>\n

Wait, but are there any limits to this tech? Right now, remote-controlled retraction only works for tapes up to 50 feet. Longer tapes (like 100-foot long tapes for surveying) would need a more powerful motor, which would add bulk to the casing and drain the battery too quickly. Also, the remote is paired to each tape, so you can\u2019t use one remote for multiple tapes\u2014we purposely designed that to prevent accidental retractions on the job site, which would ruin measurements or even hit someone with a fast-moving tape blade.<\/p>\n

Over the last year, we\u2019ve shipped over 12,000 of these tape measures to job sites across North America, and the feedback has been overwhelmingly positive. A framer in Portland, Oregon, who deals with rain 8 months out of the year told us, \u201cI used to go through 3-4 tapes a month from water damage. Your tape has lasted me 8 months, and the remote retraction means I don\u2019t have to yank a wet tape back while standing on a steep roof.\u201d A pool installer in Florida told us, \u201cI measure pool liners in standing water, and before, my tape would rust so bad the markings would be unreadable within a month. This tape\u2019s markings are still clear, even after weekly submersion, and I can retract it without getting my hands wet.\u201d<\/p>\n

We\u2019re not done improving, either. Right now, we\u2019re testing a new model that adds a small LED light on the remote for measuring in low light, like under a house or in a dark trench, and we\u2019re working on a version that\u2019s compatible with phone apps for saving measurements directly to a project log. But our core priority remains making a tool that tradespeople can rely on, not just a gimmick.<\/p>\n

If you\u2019re a contractor, landscaper, marine technician, or anyone who works with measurements in wet, harsh conditions, and you\u2019re tired of standard tape measures failing when they matter most, this is the solution you\u2019ve been looking for. The days of choosing between a waterproof tape that\u2019s hard to use, or a regular tape that gets ruined by rain, are over. Our waterproof tape measures with remote-controlled retraction are tested to hold up to immersion, rough handling, and long days on the job, and the remote makes measurements faster, safer, and less frustrating.<\/p>\n

<\/p>\n

If you\u2019re a business owner looking to upgrade your team\u2019s tools, or a trade professional in need of reliable, waterproof measuring solutions, we\u2019d love to discuss bulk orders, custom branding, and pricing tailored to your needs. Don\u2019t let water and bad design slow you down\u2014reach out to start a conversation about how our products can make your job easier.<\/p>\n

Oil Gauging Tape Measure<\/a> References<\/p>\n

    \n
  1. International Electrotechnical Commission. (2013). IEC 60529: Degrees of protection provided by enclosures (IP Code)<\/li>\n
  2. Construction Owners Association of America. (2022). Best Practices for Tool Durability in Exterior Construction Environments<\/li>\n
  3. Journal of Occupational Safety and Health. (2021). Hand Tool Design and Injury Risk in Wet Job Site Conditions<\/li>\n
  4. Underwriters Laboratories. (2020). Ingress Protection Testing for Portable Power Tools and Measuring Devices<\/li>\n<\/ol>\n
    \n

    Tianjin Lion Tool & Measure Tools Co., Ltd.<\/a>
    Tianjin Lion Tool & Measure Tools Co., Ltd. is one of the most professional waterproof tape measure manufacturers and suppliers in China, providing high quality customized products with good price. Be free to buy or wholesale cheap waterproof tape measure made in China from our factory.
    Address: Unit 3, Building 5, Liandong U Valley Mass Entrepreneurship Center, No. 22 Wanggang Road, Jinnan District, Tianjin
    E-mail: tools@lionmeasuringtape.com
    WebSite:     https:\/\/www.liontapemeasure.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    If you\u2019ve ever stood in a rain-soaked construction trench, reached over a dripping boat deck to … Are there waterproof tape measures with a remote – controlled retraction?<\/span>Read more<\/a><\/p>\n","protected":false},"author":110,"featured_media":3511,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3474],"class_list":["post-3511","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-waterproof-tape-measure-40c4-297aba"],"_links":{"self":[{"href":"http:\/\/www.nuecesdealgodon.com\/blog\/wp-json\/wp\/v2\/posts\/3511","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.nuecesdealgodon.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.nuecesdealgodon.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.nuecesdealgodon.com\/blog\/wp-json\/wp\/v2\/users\/110"}],"replies":[{"embeddable":true,"href":"http:\/\/www.nuecesdealgodon.com\/blog\/wp-json\/wp\/v2\/comments?post=3511"}],"version-history":[{"count":0,"href":"http:\/\/www.nuecesdealgodon.com\/blog\/wp-json\/wp\/v2\/posts\/3511\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.nuecesdealgodon.com\/blog\/wp-json\/wp\/v2\/posts\/3511"}],"wp:attachment":[{"href":"http:\/\/www.nuecesdealgodon.com\/blog\/wp-json\/wp\/v2\/media?parent=3511"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.nuecesdealgodon.com\/blog\/wp-json\/wp\/v2\/categories?post=3511"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.nuecesdealgodon.com\/blog\/wp-json\/wp\/v2\/tags?post=3511"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}